Add files via upload

XrayR.sh

@@ -0,0 +1,481 @@
+#!/bin/bash
+
+red='\033[0;31m'
+green='\033[0;32m'
+yellow='\033[0;33m'
+plain='\033[0m'
+
+version="v1.0.0"
+
+# check root
+[[ $EUID -ne 0 ]] && echo -e "${red}错误: ${plain} 必须使用root用户运行此脚本！\n" && exit 1
+
+# check os
+if [[ -f /etc/redhat-release ]]; then
+    release="centos"
+elif cat /etc/issue | grep -Eqi "debian"; then
+    release="debian"
+elif cat /etc/issue | grep -Eqi "ubuntu"; then
+    release="ubuntu"
+elif cat /etc/issue | grep -Eqi "centos|red hat|redhat"; then
+    release="centos"
+elif cat /proc/version | grep -Eqi "debian"; then
+    release="debian"
+elif cat /proc/version | grep -Eqi "ubuntu"; then
+    release="ubuntu"
+elif cat /proc/version | grep -Eqi "centos|red hat|redhat"; then
+    release="centos"
+else
+    echo -e "${red}未检测到系统版本，请联系脚本作者！${plain}\n" && exit 1
+fi
+
+os_version=""
+
+# os version
+if [[ -f /etc/os-release ]]; then
+    os_version=$(awk -F'[= ."]' '/VERSION_ID/{print $3}' /etc/os-release)
+fi
+if [[ -z "$os_version" && -f /etc/lsb-release ]]; then
+    os_version=$(awk -F'[= ."]+' '/DISTRIB_RELEASE/{print $2}' /etc/lsb-release)
+fi
+
+if [[ x"${release}" == x"centos" ]]; then
+    if [[ ${os_version} -le 6 ]]; then
+        echo -e "${red}请使用 CentOS 7 或更高版本的系统！${plain}\n" && exit 1
+    fi
+elif [[ x"${release}" == x"ubuntu" ]]; then
+    if [[ ${os_version} -lt 16 ]]; then
+        echo -e "${red}请使用 Ubuntu 16 或更高版本的系统！${plain}\n" && exit 1
+    fi
+elif [[ x"${release}" == x"debian" ]]; then
+    if [[ ${os_version} -lt 8 ]]; then
+        echo -e "${red}请使用 Debian 8 或更高版本的系统！${plain}\n" && exit 1
+    fi
+fi
+
+confirm() {
+    if [[ $# > 1 ]]; then
+        echo && read -p "$1 [默认$2]: " temp
+        if [[ x"${temp}" == x"" ]]; then
+            temp=$2
+        fi
+    else
+        read -p "$1 [y/n]: " temp
+    fi
+    if [[ x"${temp}" == x"y" || x"${temp}" == x"Y" ]]; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+confirm_restart() {
+    confirm "是否重启XrayR" "y"
+    if [[ $? == 0 ]]; then
+        restart
+    else
+        show_menu
+    fi
+}
+
+before_show_menu() {
+    echo && echo -n -e "${yellow}按回车返回主菜单: ${plain}" && read temp
+    show_menu
+}
+
+install() {
+    bash <(curl -Ls https://raw.githubusercontent.com/XrayR-project/XrayR-release/master/install.sh)
+    if [[ $? == 0 ]]; then
+        if [[ $# == 0 ]]; then
+            start
+        else
+            start 0
+        fi
+    fi
+}
+
+update() {
+    if [[ $# == 0 ]]; then
+        echo && echo -n -e "输入指定版本(默认最新版): " && read version
+    else
+        version=$2
+    fi
+#    confirm "本功能会强制重装当前最新版，数据不会丢失，是否继续?" "n"
+#    if [[ $? != 0 ]]; then
+#        echo -e "${red}已取消${plain}"
+#        if [[ $1 != 0 ]]; then
+#            before_show_menu
+#        fi
+#        return 0
+#    fi
+    bash <(curl -Ls https://raw.githubusercontent.com/XrayR-project/XrayR-release/master/install.sh) $version
+    if [[ $? == 0 ]]; then
+        echo -e "${green}更新完成，已自动重启 XrayR，请使用 XrayR log 查看运行日志${plain}"
+        exit
+    fi
+
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+config() {
+    echo "XrayR在修改配置后会自动尝试重启"
+    vi /etc/XrayR/config.yml
+    sleep 2
+    check_status
+    case $? in
+        0)
+            echo -e "XrayR状态: ${green}已运行${plain}"
+            ;;
+        1)
+            echo -e "检测到您未启动XrayR或XrayR自动重启失败，是否查看日志？[Y/n]" && echo
+            read -e -p "(默认: y):" yn
+            [[ -z ${yn} ]] && yn="y"
+            if [[ ${yn} == [Yy] ]]; then
+               show_log
+            fi
+            ;;
+        2)
+            echo -e "XrayR状态: ${red}未安装${plain}"
+    esac
+}
+
+uninstall() {
+    confirm "确定要卸载 XrayR 吗?" "n"
+    if [[ $? != 0 ]]; then
+        if [[ $# == 0 ]]; then
+            show_menu
+        fi
+        return 0
+    fi
+    systemctl stop XrayR
+    systemctl disable XrayR
+    rm /etc/systemd/system/XrayR.service -f
+    systemctl daemon-reload
+    systemctl reset-failed
+    rm /etc/XrayR/ -rf
+    rm /usr/local/XrayR/ -rf
+
+    echo ""
+    echo -e "卸载成功，如果你想删除此脚本，则退出脚本后运行 ${green}rm /usr/bin/XrayR -f${plain} 进行删除"
+    echo ""
+
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+start() {
+    check_status
+    if [[ $? == 0 ]]; then
+        echo ""
+        echo -e "${green}XrayR已运行，无需再次启动，如需重启请选择重启${plain}"
+    else
+        systemctl start XrayR
+        sleep 2
+        check_status
+        if [[ $? == 0 ]]; then
+            echo -e "${green}XrayR 启动成功，请使用 XrayR log 查看运行日志${plain}"
+        else
+            echo -e "${red}XrayR可能启动失败，请稍后使用 XrayR log 查看日志信息${plain}"
+        fi
+    fi
+
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+stop() {
+    systemctl stop XrayR
+    sleep 2
+    check_status
+    if [[ $? == 1 ]]; then
+        echo -e "${green}XrayR 停止成功${plain}"
+    else
+        echo -e "${red}XrayR停止失败，可能是因为停止时间超过了两秒，请稍后查看日志信息${plain}"
+    fi
+
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+restart() {
+    systemctl restart XrayR
+    sleep 2
+    check_status
+    if [[ $? == 0 ]]; then
+        echo -e "${green}XrayR 重启成功，请使用 XrayR log 查看运行日志${plain}"
+    else
+        echo -e "${red}XrayR可能启动失败，请稍后使用 XrayR log 查看日志信息${plain}"
+    fi
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+status() {
+    systemctl status XrayR --no-pager -l
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+enable() {
+    systemctl enable XrayR
+    if [[ $? == 0 ]]; then
+        echo -e "${green}XrayR 设置开机自启成功${plain}"
+    else
+        echo -e "${red}XrayR 设置开机自启失败${plain}"
+    fi
+
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+disable() {
+    systemctl disable XrayR
+    if [[ $? == 0 ]]; then
+        echo -e "${green}XrayR 取消开机自启成功${plain}"
+    else
+        echo -e "${red}XrayR 取消开机自启失败${plain}"
+    fi
+
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+show_log() {
+    journalctl -u XrayR.service -e --no-pager -f
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+install_bbr() {
+    bash <(curl -L -s https://raw.githubusercontent.com/chiakge/Linux-NetSpeed/master/tcp.sh)
+    #if [[ $? == 0 ]]; then
+    #    echo ""
+    #    echo -e "${green}安装 bbr 成功，请重启服务器${plain}"
+    #else
+    #    echo ""
+    #    echo -e "${red}下载 bbr 安装脚本失败，请检查本机能否连接 Github${plain}"
+    #fi
+
+    #before_show_menu
+}
+
+update_shell() {
+    wget -O /usr/bin/XrayR -N --no-check-certificate https://raw.githubusercontent.com/XrayR-project/XrayR-release/master/XrayR.sh
+    if [[ $? != 0 ]]; then
+        echo ""
+        echo -e "${red}下载脚本失败，请检查本机能否连接 Github${plain}"
+        before_show_menu
+    else
+        chmod +x /usr/bin/XrayR
+        echo -e "${green}升级脚本成功，请重新运行脚本${plain}" && exit 0
+    fi
+}
+
+# 0: running, 1: not running, 2: not installed
+check_status() {
+    if [[ ! -f /etc/systemd/system/XrayR.service ]]; then
+        return 2
+    fi
+    temp=$(systemctl status XrayR | grep Active | awk '{print $3}' | cut -d "(" -f2 | cut -d ")" -f1)
+    if [[ x"${temp}" == x"running" ]]; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+check_enabled() {
+    temp=$(systemctl is-enabled XrayR)
+    if [[ x"${temp}" == x"enabled" ]]; then
+        return 0
+    else
+        return 1;
+    fi
+}
+
+check_uninstall() {
+    check_status
+    if [[ $? != 2 ]]; then
+        echo ""
+        echo -e "${red}XrayR已安装，请不要重复安装${plain}"
+        if [[ $# == 0 ]]; then
+            before_show_menu
+        fi
+        return 1
+    else
+        return 0
+    fi
+}
+
+check_install() {
+    check_status
+    if [[ $? == 2 ]]; then
+        echo ""
+        echo -e "${red}请先安装XrayR${plain}"
+        if [[ $# == 0 ]]; then
+            before_show_menu
+        fi
+        return 1
+    else
+        return 0
+    fi
+}
+
+show_status() {
+    check_status
+    case $? in
+        0)
+            echo -e "XrayR状态: ${green}已运行${plain}"
+            show_enable_status
+            ;;
+        1)
+            echo -e "XrayR状态: ${yellow}未运行${plain}"
+            show_enable_status
+            ;;
+        2)
+            echo -e "XrayR状态: ${red}未安装${plain}"
+    esac
+}
+
+show_enable_status() {
+    check_enabled
+    if [[ $? == 0 ]]; then
+        echo -e "是否开机自启: ${green}是${plain}"
+    else
+        echo -e "是否开机自启: ${red}否${plain}"
+    fi
+}
+
+show_XrayR_version() {
+    echo -n "XrayR 版本："
+    /usr/local/XrayR/XrayR -version
+    echo ""
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+show_usage() {
+    echo "XrayR 管理脚本使用方法: "
+    echo "------------------------------------------"
+    echo "XrayR              - 显示管理菜单 (功能更多)"
+    echo "XrayR start        - 启动 XrayR"
+    echo "XrayR stop         - 停止 XrayR"
+    echo "XrayR restart      - 重启 XrayR"
+    echo "XrayR status       - 查看 XrayR 状态"
+    echo "XrayR enable       - 设置 XrayR 开机自启"
+    echo "XrayR disable      - 取消 XrayR 开机自启"
+    echo "XrayR log          - 查看 XrayR 日志"
+    echo "XrayR update       - 更新 XrayR"
+    echo "XrayR update x.x.x - 更新 XrayR 指定版本"
+    echo "XrayR install      - 安装 XrayR"
+    echo "XrayR uninstall    - 卸载 XrayR"
+    echo "XrayR version      - 查看 XrayR 版本"
+    echo "------------------------------------------"
+}
+
+show_menu() {
+    echo -e "
+  ${green}XrayR 后端管理脚本，${plain}${red}不适用于docker${plain}
+--- https://github.com/XrayR-project/XrayR ---
+  ${green}0.${plain} 修改配置
+————————————————
+  ${green}1.${plain} 安装 XrayR
+  ${green}2.${plain} 更新 XrayR
+  ${green}3.${plain} 卸载 XrayR
+————————————————
+  ${green}4.${plain} 启动 XrayR
+  ${green}5.${plain} 停止 XrayR
+  ${green}6.${plain} 重启 XrayR
+  ${green}7.${plain} 查看 XrayR 状态
+  ${green}8.${plain} 查看 XrayR 日志
+————————————————
+  ${green}9.${plain} 设置 XrayR 开机自启
+ ${green}10.${plain} 取消 XrayR 开机自启
+————————————————
+ ${green}11.${plain} 一键安装 bbr (最新内核)
+ ${green}12.${plain} 查看 XrayR 版本 
+ ${green}13.${plain} 升级维护脚本
+ "
+ #后续更新可加入上方字符串中
+    show_status
+    echo && read -p "请输入选择 [0-13]: " num
+
+    case "${num}" in
+        0) config
+        ;;
+        1) check_uninstall && install
+        ;;
+        2) check_install && update
+        ;;
+        3) check_install && uninstall
+        ;;
+        4) check_install && start
+        ;;
+        5) check_install && stop
+        ;;
+        6) check_install && restart
+        ;;
+        7) check_install && status
+        ;;
+        8) check_install && show_log
+        ;;
+        9) check_install && enable
+        ;;
+        10) check_install && disable
+        ;;
+        11) install_bbr
+        ;;
+        12) check_install && show_XrayR_version
+        ;;
+        13) update_shell
+        ;;
+        *) echo -e "${red}请输入正确的数字 [0-12]${plain}"
+        ;;
+    esac
+}
+
+
+if [[ $# > 0 ]]; then
+    case $1 in
+        "start") check_install 0 && start 0
+        ;;
+        "stop") check_install 0 && stop 0
+        ;;
+        "restart") check_install 0 && restart 0
+        ;;
+        "status") check_install 0 && status 0
+        ;;
+        "enable") check_install 0 && enable 0
+        ;;
+        "disable") check_install 0 && disable 0
+        ;;
+        "log") check_install 0 && show_log 0
+        ;;
+        "update") check_install 0 && update 0 $2
+        ;;
+        "config") config $*
+        ;;
+        "install") check_uninstall 0 && install 0
+        ;;
+        "uninstall") check_install 0 && uninstall 0
+        ;;
+        "version") check_install 0 && show_XrayR_version 0
+        ;;
+        "update_shell") update_shell
+        ;;
+        *) show_usage
+    esac
+else
+    show_menu
+fi